Welcome, Guest ( Register | Login )



Classifieds in Water rides

Photo

Title
Description

country Price Store
front..
Edit
Anonymous
Listing..
Mason Waterslides- NEW !! Mason Waterslides- NEW !!

Priced from $15K USD to $120K USD.

United States $0.00 USD
 
Dual Spiral Water Slides and infrastructure Dual Spiral Water Slides and infrastructure

Custom-built by a Swedish engineer in 1972. Erected at an amusement park which closed in Spring of 2008. Assembly blueprints included. The tower is 60 feet high, deep flumes are each 350 ft. long. All pumps (2,000 gpm) and hardware are included. It is a very safe and fun attraction. Riders get good speed with great spiraling corners. All ages can enjoy. Available in Oregon. Subject to availability when ordered. TMAECH ad ref. #573.

United States $74,995.00 USD
 
42"W molded fiberglass water slide sections (used) 42"W molded fiberglass water slide sections (used)

Made by Pro Slide. Following sizes available at $600 per section: 9 sections - 3m radius, 48"L inside curve and 75"L outside curve; 10 sections - 6m radius, 83"L inside curve and 103"L outside curve; 20 sections - 4m radius, 75"L inside curve and 103"L outside curve; 1 exit section - 60"L. Available in North Carolina. Subject to availability when ordered. TMAECH ad ref. #551.

United States $600.00 USD
 
Adult battery-powered 'blaster' bumper boats (12) Adult battery-powered 'blaster' bumper boats (12)

Made by J&J Amusements. This system sells new for $43,200. "Blaster Boat" models shoot water, have overall diameter of 72". Recommended pool depth: 36". Wet weight: 390 lb. Batteries (4): 6V/220 amp hr. (Trojan t105, t125, t145 or equivalent). Charge System/Power Requirement: Automatic 24 volt/115VAC/60Hz/15Amp. 12 boats complete with tubes, motors, pumps, batteries (some may need to be recharged or replaced), chargers, and a stock of spare parts. Available in Oregon. Subject to availability when ordered. TMAECH ad ref. #224.

United States $18,995.00 USD
 
PRICE REDUCED! 160'L x 42"W open flume water slide PRICE REDUCED! 160'L x 42"W open flume water slide

Made by Miracle Recreation Co. Used only 7 years. Includes steel flume support columns and support arms, brackets, connecting hardware, and blueprints. Start height is 18-1/2 feet. Needs start tower (NEW hot-dipped galvanized steel start tower is available for $30.000). Also requires a 3 hp, 150 gpm pump. Slide surface is in very good condition. Disassembled and stored. Available in Missouri. Subject to availability when ordered. TMAECH ad ref. #593.

United States $24,995.00 USD
 
NEW 45.5'L x 32"W Deck Mount Fiberglass Pool Slide NEW 45.5'L x 32"W Deck Mount Fiberglass Pool Slide

Made by Aquatics. 32" diameter Aqua Twist tube slide is designed for mounting on residential pool decks. Installation footprint is 28'10"L x 20'11"W (setback from pool edge). Start platform height is 10'8-1/4". Slide exit is 18" past pool edge and 12" above water line. Includes all hot-dipped galvanized steel tower, treads, and supports; molded fiberglass slide; and Stainless Steel connecting hardware. Available in Missouri. Financing available for qualified US buyer. TMAECH ad ref. #137

United States $39,995.00 USD
 
700-ft. long 84-in. wide body/rafting water slide 700-ft. long 84-in. wide body/rafting water slide

Made by Whitewater West Industries. These two slides were disassembled and replaced with new fiberglass, using existing flume supports and connecting hardware. The used fiberglass flumes are now available (at half the cost of new), and can be custom-reconfigured as one or two matching slides on your site. Design services, flume supports, connecting hardware, on-site refurbishment and installation services are available. Fiberglass flumes are available for inspection in Colorado. Subject to availability when ordered. TMAECH ad ref. #594.

United States $139,995.00 USD
 
80'L x 42"W winding flume water slide (installed) 80'L x 42"W winding flume water slide (installed)

Refurbished using pre-owned Pro Slide fiberglass water slide sections, to look and wear like new. Installed on your site, with pressure-treated wood steps, 12'H x 8' x 8' start tower, flume supports, and 'slide bridge' for unrestricted movement around your pool. Includes pump and stamped plans. 12/24 month warranty on installation/slide coating. Financing available for qualified US buyer. TMAECH ad ref. #485.

United States $64,995.00 USD
 
Twin 178.5-ft. long drop water slides Twin 178.5-ft. long drop water slides

Manufacturer unknown. Each slide includes start tub and flat runout sections. Flume width is 29". Average section length is 10' 6" (34 sections total: 12 concave, 12 convex, 10 flat). Ideal for hillside application. Available in North Carolina. Subject to availability when ordered. Financing available for qualified US buyer. TMAECH ad ref. #609.

United States $14,995.00 USD
 
1600 ft. of 42"W fiberglass water slide sections 1600 ft. of 42"W fiberglass water slide sections

Flume width is 42 inches. Sections are available in straight and curved lengths from 6 ft. to 9 ft. each. Available in North Carolina. Subject to availability when ordered. TMAECH ad ref. #610.

United States $400.00 USD
 

Newest Auctions in Water rides

Photo

Title
Description

country Bids Price Time Left Store
front..
Edit
Anonymous
Listing..
Bumper Boats - 7 complete and ready to use Bumper Boats - 7 complete and ready to use

Bumper boats for sell by summer camp. manufactured by J&J Amusements 7 - complete bumper boats with hulls, gas tanks, prop, prop guard and tube. 9 - spare hulls 4 - spare motors (have been used as parts) 8 - spare gas tanks 1 - shop dolly that supports 12 motors 1 - shop dolly that supports 8 motors Value of these items bought new is $28.205.00, we are selling for $18,000.00 or best offer. Buyer will need to arrange shipment from Hot Springs, Arkansas. No warranty will be given or implied. Serious inquiries only please: mike@brookhillranch.com

United States - $18,000.00 USD 15 w, 6 d